Coagulant dosage ratio
Coagulants are mainly used to remove suspended matter and colloidal particles in sewage. Commonly used coagulants include aluminum sulfate, polyaluminum chloride (PAC) and ferric chloride.
1. Aluminum sulfate
- Scope of application: Applicable to sewage with high pH value and high alkalinity.
Dosage ratio: Generally 50-150 mg/L.
Technical indicators: The content of Al2O3, the effective component of aluminum sulfate, should be above 15%.
Operation skills: Aluminum sulfate should be fully dissolved before use, the dissolution time is about 30 minutes, and the dissolution concentration is generally 5-10%.
2. Polyaluminum chloride (PAC)
Scope of application: Applicable to sewage with various pH ranges, especially high turbidity sewage.
Dosage ratio: Generally 10-50 mg/L.
Technical indicators: The alkalinity of PAC should be between 50-80%.
Operation tips: PAC should be fully dissolved before use, the dissolution time is about 30 minutes, and the dissolution concentration is generally 5-10%.
The actual use of the configuration concentration should be adjusted according to the specific water quality and treatment objectives, and the optimal dosage may need to be determined through experiments. Normal configuration concentration: The normal configuration concentration of polyaluminium chloride is 10%-16%. This means that in 100 kg of PAC solution, there are 10-16 kg of PAC dry powder. This concentration refers to the concentration of the agent solution, not directly related to the volume of water.
Dosage: Dosage per ton of sewage: The dosage of polyaluminium chloride is about 0.5-2KG PAC dry powder per ton of sewage. This dosage is determined based on the characteristics and treatment requirements of the sewage, and should be adjusted according to the specific water quality and treatment objectives in actual use.
Dosage for different water qualities: The dosage of PAC varies under different water quality conditions. Here are some reference values:
Domestic water: 2.5-25 kg/thousand tons of water
Industrial water: 2.5-25 kg/thousand tons of water
Urban sewage: 15-50 kg/thousand tons of water
Electroplating wastewater: 20-100 kg/thousand tons of water
Metallurgical wastewater: 20-150 kg/thousand tons of water
Papermaking wastewater: 50-300 kg/thousand tons of water
Tannery wastewater: 100-300 kg/thousand tons of water
Food wastewater: 50-150 kg/thousand tons of water
Chemical wastewater: 50-100 kg/thousand tons of water
Emulsified wastewater: 50-200 kg/thousand tons of water
Coal washing wastewater: 30-100 kg/thousand tons of water
These data provide the approximate proportion and dosage of different reagents in each ton of water treatment. In actual use, they should be adjusted according to the specific water quality and treatment goals, and the optimal dosage may need to be determined through experiments.
3. Ferric chloride
Scope of application: Suitable for sewage containing heavy metal ions.
Dosage ratio: Generally 10-50 mg/L.
Technical indicators: The content of Fe2O3, the effective component of ferric chloride, should be above 30%.
Operation tips: Ferric chloride should be fully dissolved before use, the dissolution time is about 30 minutes, and the dissolution concentration is generally 5-10%.
Flocculant dosage ratio
Flocculants are mainly used to enhance the coagulation effect. Commonly used flocculants include polyacrylamide (PAM) and the like.
1. Polyacrylamide (PAM)
Scope of application: Applicable to flocculation treatment of various sewage.
Dosage ratio: Generally 0.1-0.5 mg/L.
Technical indicators: The molecular weight of PAM should be above 10 million.
Operation technology: PAM should be fully dissolved before use. The dissolution time is about 60 minutes, and the dissolution concentration is generally 0.1-0.5%.
Dosage ratio of carbon source agent
Carbon source agents are mainly used in biological denitrification processes. Commonly used carbon source agents include methanol, ethanol, acetic acid, etc.
1. Methanol
Scope of application: Applicable to denitrification processes.
Dosage ratio: Generally 3 mg/L (for every 1 mg/L of nitrate removed).
Technical indicators: The purity of methanol should be above 99%.
Operation tips: Methanol should be added directly to the anoxic section and fully mixed with the influent and mixed liquid through an agitator.
Practical operation tips
1. Dissolution and storage of reagents
- The reagent should be fully dissolved before use, and the dissolution time and concentration should be determined according to the characteristics of the specific reagent.
- The reagent should be stored in a dry, cool, well-ventilated place, avoiding direct sunlight and high temperature.
2. Adding point selection
- The dosing point of the reagent should be selected as far as possible in a place with large water turbulence to ensure that the reagent can be quickly and evenly diffused.
- For multi-stage treatment processes, the reagent should be added in sections to improve the treatment effect.
3. Dosing equipment
- The dosing equipment should use a metering pump to ensure the accuracy of the dosing amount.
- The dosing equipment should be regularly maintained to ensure its normal operation.
4. Online monitoring and control
- An online monitoring system should be set up to monitor the quality of the inlet and outlet water in real time and adjust the dosage of the reagent in time.
- An automatic control system should be set up to automatically adjust the dosage of the reagent according to changes in water quality to ensure that the effluent quality is stable and meets the standards.
