Shaftless Screw Conveyor

Shaftless Screw Conveyor
Details:
1. Shaftless screw conveyor has a certain degree of overload resistance, and there are no bearings in the material tank
2. Except for the open inlet and outlet, all other parts can be covered and sealed to prevent material overflow
Send Inquiry
Download
Description
Technical Parameters

Products Description

 

 

A shaftless screw conveyor consists of a drive mechanism (motor, reducer, drive shaft), a U-shaped trough and bracket, a shaftless screw, lining strips, a cover plate, an inlet, an outlet, and fasteners. The conveyor operates at an appropriate rotational speed to transport screenings (or sludge) without causing blockages.

1. Main Structure:

⑴ The spiral trough is made from sheet metal (thickness greater than 4.5 mm), which is formed using a dedicated mold to create a U-shaped cross-section. A semicircular, wear-resistant liner is installed at the bottom of the trough. The liner is made from a highly wear-resistant non-metallic material, with its arc aligned to the spiral radius to minimize excess clearance and enhance conveying efficiency. The liner has a long service life and is easy to install and replace, with a guaranteed service life of at least two years. The liner plate must be positioned higher than the center of the conveyor trough.

The trough body features an inlet for feeding. Except for the open inlet, the entire conveyor is enclosed by a flat cover along the spiral trough. The feed inlet is designed to align with the screen or dewatering outlet, ensuring that material falls completely into the conveyor. The discharge outlet is located at the opposite end of the conveyor, away from the drive mechanism.

The frame is constructed from stainless steel and secured to the concrete foundation with steel supports.

⑵ The shaftless spiral blades are made of high-strength material to provide sufficient strength and rigidity. They are hot-drawn using a specialized tooling die, resulting in uniform and consistent blade spacing. Their outer diameter matches the U-shaped trough and provides an appropriate rotational speed to ensure smooth material conveyance without causing blockages. The blade thickness should be no less than 20 mm, and the spiral blades should be no less than 80 mm in height.

⑶ The drive mechanism is assembled at one end of the screw conveyor and directly connected to the spiral blade drive shaft, eliminating the need for a coupling. The reducer uses a combination of helical and worm gears, flange-mounted for high transmission efficiency, low noise, long service life, and smooth operation.

The reducer bearings are well lubricated and have a service life of at least 100,000 hours. The gear reduction motor should be from a reputable brand with a service factor of at least 1.6. The gears are made of alloy steel, quenched and ground, with a tooth surface hardness of at least HRC 58-62. The drive motor is designed for 380V, three-phase, 50Hz operation, with an IP65 protection rating and Class F insulation. The motor's rated power should be 20% greater than its maximum power consumption, and the speed should be less than 1500 rpm. The conveyor is equipped with overload protection and alarms. The drive unit is suitable for outdoor use and also has an IP65 protection rating.

The shaftless screw conveyor is used to transport various wastes and filter residues generated in industrial production processes. The structural form consists of a shaftless screw, with materials being input at the inlet and transported by the screw to the discharge end. The entire transmission process occurs within a closed tank, except for the inlet and outlet hoppers. The transmission uses a shaft-mounted reducer, and bearings and dust-proof oil seals are installed at the reducer end. There are no high-speed running components during the operation of the equipment. The spiral lining is made of wear-resistant nylon, which offers low wear and requires minimal maintenance.

The shaftless screw conveyor uses rotating screw blades to push and transport materials, while the weight of the material itself, along with the frictional resistance of its casing, prevents it from rotating together with the screw conveyor blades.

 

Specification

 

Model

18-20RPM, reference convey capacity(m³/h)

 

Angle(0 degree)

Angle(15 degree)

Angle(30 degree)

WLS260

2.2

1.4

1.0

WLS320

4.4

3.3

2.2

WLS355

8.3

5.8

3.3

WLS420

12.8

9.3

5.8

WLS500

16.5

12

8

shaftless screw conveyor 1
shaftless screw conveyor sewage

 

Suitable for conveying granular and powdery materials, wet and paste-like materials, semi-fluid and viscous materials, materials prone to entanglement and blockage, and materials with special hygiene requirements.

 

Feature

 

Smooth operation: The drive device uses a shaft-mounted parallel-shaft helical gear reducer, which has a compact structure and ensures smooth operation.

Bidirectional conveying: The conveying direction is determined by the spiral direction of the blades and the rotation direction of the motor, allowing for bidirectional conveying.

Application

 

It is used for transporting mechanical bar screens (with a net grille gap of less than 50 mm) in water supply and drainage pump stations and sewage treatment plants, as well as for transporting and lifting sludge in sludge dewatering rooms. It can also be used for material transportation in the sugar, wine, food processing, textile, printing and dyeing, and leather industries.

shaftless screw conveyor for sludge

 

FAQ

 

Q: 1. What is the recommended conveying length?

A: Less than 20 meters

Q: 2. What is the installation angle?

A: Less than 30 degrees.

 

 

Hot Tags: shaftless screw conveyor, China shaftless screw conveyor manufacturers, suppliers, factory, beverage solid liquid separator, supply of solid liquid separator, airport solid liquid separator, noise level of solid liquid separator, manufacturer of solid liquid separator, industrial solid liquid separator

Send Inquiry