

Submersible mixer or pump?
"Submersible mixer pump" is a name some buyers use for a submersible mixer. Strictly, a mixer isn't a pump. It doesn't lift water out of a tank or send it down a pipe. It sits in the tank and stirs, so the liquid keeps moving and the solids stay suspended. This page shows one of our small QJB mixers, the QJB3/8-400/3-740S, and helps you check whether a mixer is what you need.
Which one do you need?
Moving large volumes of liquid between tanks at low head, for example returning nitrate-rich liquid to an anoxic tank? The submersible recirculation pump.
Lifting sewage from a pit or sump to a higher level? The non-clog sewage submersible pump.
Large aeration tanks and oxidation ditches? The low speed submersible mixer. For propellers above 2 m, a gearbox is recommended.
Not sure? Tell us what you want the equipment to do.
The 3 kW model
A 3 kW motor turns a 400 mm propeller at 740 rpm and gives 920 N of thrust. It's a small mixer for tanks that need a bit more than our 1.5 kW model, which gives 600 N (see mixer submersible).
The motor drives the propeller directly, with no gearbox. The propeller pushes a steady flow across the tank.
Technical data
|
Model |
QJB3/8-400/3-740S |
|
Rated current(A) |
11 |
|
Propeller diameter(mm) |
400 |
|
Power(kw) |
3 |
|
Rotating speed(r/min) |
740 |
|
Weight(kg) |
100 |
|
Thrust(N) |
920 |
|
Material of submersible mixer |
SS304 |
|
Electric |
380V, 3 phase, 50HZ |
|
Wire cable(m) |
10 |
|
Insulation class |
F |
|
Protection class |
IP68 |
|
Dimension of wooden case |
Roughly 800*610*670mm |
Mounting
The mixer hangs on a guide rod, so you can lift it out without draining the tank. With Mounting System I, for tanks under 4 m deep, the mixer can rotate horizontally around the guide rod by up to ±60°. Several mixers can share one lifting device, unless you specify otherwise.
FAQ
Is it a pump?
No. It stirs the liquid in the tank. It doesn't move water from one place to another.
Can it empty a tank?
No. For that you need a pump.
What's the difference from the 1.5 kW model?
The 3 kW gives 920 N of thrust against 600 N, and it draws 11 A against 5.8 A.
Do you have drawings and a manual?
Yes. Contact us for the detailed manual and drawings.
Hot Tags: submersible mixer pump, China submersible mixer pump manufacturers, suppliers, factory, continuous mixer, turbine agitator, mixer with blades, bottom entry agitator, chemical agitator, agitator for quality control







